Tutorial: How to Downgrade your PS3 with E3. First read this post and download the required files. Updating E3 Card Reader. Factory/Service mode and back in. Turning it off then on does not put me in factory mode. I have 3 E3 card readers, and none of them are working. What am I doing wrong here? The E3 Flasher TF card has 5 switches down and the 6th switch up from when I wrote the e3 downgrade. Bin file to it. The micro SD card is still attached. What you will need for this tutorial: - USB Dongle with the payload to go to factory mode (ex: E3 Card Reader) - USB Flashdrive formated as FAT32 - 3.55 CEX Firmware.

Tutorial: How to Downgrade your PS3 with E3 Card Reader Submitted by; December 04, 2010 First and download the required files. Updating E3 Card Reader with the downgrade software is extremely simple: Connect the device to your PC and drag-n-drop the bin file to the 'E3Upgrader' drive.

That's it -- your device has been updated. Safely eject E3 Card Reader and now lets perform the actual downgrade. This method is almost identical to. Also, I suggest you backup your saved games -- they'll be long gone after the downgrade. I made that mistake once.

• Insert E3 Card Reader that has been programmed with the downgrade software into your PS3. • Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. The Last Blade Ps2 Iso Game. Your console will turn on and E3 Card Reader will light up the red LED followed by the blue LED.

• Turn off system via menu. • Remove E3 Card Reader dongle and turn on console to make sure you are in Factory/Service Mode. You will see a huge red box on the screen saying Factory/Service Mode. Turn the PS3 off again. • Load any blank FAT32 USB flash drive with 2 files in the root directory: • Modified 3. Download Random Walk Trading Rare. 41 PUP • Lv2Diag.self (File 1) • These must be the only files on the USB drive and must be placed in the main (root) directory. • Insert flash drive into the last USB port to the right -- the first USB port in from the right side if youre facing the console.

Turn the PS3 on and you will see a black screen but the PS3 HDD light will flash. • The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off. • Remove the flash drive and turn on the console, you will still be in Factory/Service Mode. Please verify you have downgraded successfully to version 3.41 by going to 'System Information'. Turn the PS3 off.